3-4 Chapter 3: OSD (On-Screen Display) menu
Set the image related setting from this menu.
MOVE / E N T E R BACK / E X I T
ASU S V L 2 79
Sta n d a r d Mode H D M I 1920 x 1 0 80 @ 6 0 H z
Image
Shar p n e s s
Trac e F r e e
Aspe c t C o n tr o l
Vivi d P i x e l
Posi t i o n
Focu s
Auto A d j u s t
More
: The adjusting range is from 0 to 100.
: Adjusts the response time of the monitor.
: Adjusts the aspect ratio to full, 4:3, 1:1 or OverScan.
4:3 is only available when input source is in 4:3 format. OverScan is only
available for the HDMI input source.
: Enhances the outline of the displayed picture and generates
high-quality images on screen.
: Turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
: adjusts the horizontal position
(H-Position) and the vertical position (V-Position) of the image. The
adjusting range is from 0 to 100.
: reduces Horizonal-line noise
and Vertical-line noise of the image by adjusting (Phase) and (Clock)
separately. The adjusting range is from 0 to 100.
• Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
• Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.
: Automatically adjusts the image to its optimized position,
clock, and phase (for VGA mode only).
To Next Page
Loading...
