Asus VP248 Series - Monitor Controls Overview

1-4
Chapter 1: Product Introduction
1.5 Monitor introduction
1.5.1 Using the Controls button
Use the control button on the back of the monitor to adjust the image
settings.
3
4
7
8 56
2
1
VP248H/VP248HG/VP248HL/VP248QG/
VP248QGL/VP248QGL-P
1. Power Indicator:
• The color definition of the power indicator is as the below table.
Status Description
White ON
Amber Standby mode
OFF OFF
2. Power Button:
• Press this button to turn the monitor on/off.
3. MENU Button:
• Press this button to enter the OSD menu.
4. Close Button
• Exit the OSD menu.
5. Input Select Button.
• Use this hotkey to switch from VGA, HDMI input signal(VP248H/
VP248HG/VP248HL).
• Use this hotkey to switch from VGA, HDMI, DisplayPort input
signal(VP248QG/VP248QGL/VP248QGL-P).
6. QuickFit Button:
• This is a hotkey to activate the QuickFit function designed for alignment.