Asus VP278 Series - Control Buttons and QuickFit Function

1-4
Chapter 1: Product Introduction
1.5 Monitor introduction
1.5.1 Using the Controls button
Use the control button on the back of the monitor to adjust the image
settings.
3
4
7
5
6
8
2 1
1. Power Indicator:
• The color definition of the power indicator is as the below table.
Status Description
White ON
Amber Standby mode
OFF OFF
2. Power Button:
• Press this button to turn the monitor on/off.
3. MENU Button:
• Press this button to enter the OSD menu.
4. Close Button
• Exit the OSD menu.
5. Input Select Button:
• Use this hotkey to switch from VGA, HDMI-1, HDMI-2, DisplayPort (only
for VP278Q) input signal.
6. QuickFit Button:
• This is a hotkey to activate the QuickFit function designed for alignment.