Asus VP279 Series - Page 26

3-6
Chapter3:GeneralInstruction
• Aspect Control: Adjust the aspect ratio to “Full”, “4:3”, or
“OverScan”.
• 4:3 is only available when the input source is in 4:3 format.
• OverScan is only available for HDMI input.
• VividPixel: ASUS Exclusive Technology that brings lifelike
visuals for crystal-clear and detail-oriented enjoyment. The
adjustingrangeisfrom0~100.
• ASCR: Select ON or OFF to enable or disable dynamic contrast
ratio function.
• Adaptive-Sync/FreeSync: Allows an Adaptive-Sync or
FreeSync supported graphics source (HDMI and DisplayPort) to
dynamically adjust display refresh rate based on typical content
frame rates for power efficient, virtually stutter free and low-
latency display update.
• If the Adaptive-Sync/FreeSync is enabled, the ELMB function is grayed out.
• ELMB: Decreases motion blur and minimize ghosting part when
on-screen objects are fast-moving. This function is available
when the refresh rate is 75Hz.
• If the Adaptive-Sync/FreeSync is enabled, the ELMB function is grayed out.
• Position: Adjust the horizontal position (H-Position) and the
vertical position (V-Position) of the image. The adjusting range is
from0to100(onlyavailableforVGAinput).
• Focus: Reduce the Horizontal-line noise and Vertical-line noise
of the image by adjusting (Phase) and (Clock) separately. The
adjustingrangeisfrom0to100(onlyavailableforVGAinput).
• Auto Adjust: Automatically perform Auto Adjust (only available
forVGAinput).