Asus VX229 Series - Detaching the Base

2-2
Chapter 2: Setup
2.1.2 Detaching the base
1. Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
2. Useyourngerstoloosenthescrewlocatedatthebottomofthe
base, and remove the base from the stand.
3. Or, you may directly use a screwdriver to remove the screw that
secures the base to the stand, and detach the base from the stand.
• We recommend that you cover the table surface with soft cloth to
prevent damage to the monitor.
• Hold the base while removing the screw.