Asus VX238H - Input Select; System Setup

3-3
Chapter3:GeneralInstruction
• Focus:reducestheHorizonal-linenoiseandVertical-linenoise
oftheimagebyadjusting(Phase)and(Clock)separately.The
adjustingrangeisfrom0to100.
• Phaseadjuststhephaseofthepixelclocksignal.Withawrongphase
adjustment, the screen shows horizontal distrubances.
• Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripesandtheimageinotproportional.
4. Input Select
In this menu, you can select your
desiredinputsource:VGA, DVI,
or HDMI.
• DVI:Availableformodel
VX238T, VX238N only.
• HDMI:Availableformodel
VX238H only.
5. System Setup
Allows you to adjust the system.
• Splendid Demo Mode:
splits the screen into two for
Splendid mode comparison.
• Volume:Adjustthe
earphone output volume
level.Theadjustingrange
is from 0 to 100.
• ECO Mode:Activatetheecologymodeforpowersaving.(Some
graylevelsmaynotbedistinguishedifECOisON.Itsbrightness
islowerthanthatwhensettingtheContrastRatioto100.)
• OSD Setup:Adjustthehorizontalpostition(H-Position),vertical
position (V-Position), OSD Timeout, DDD/CI, and Transparency
of the OSD screen.
• Language:SelectOSDlanguage.TheselectionsareEnglish,
French,German,Spanish,Italian,Dutch,Russian,Traditional
Chinese, Simplified Chinese, and Japanese.
• Information:DisplaythemonitorinformationofInputPort,
Resolution, H-freq., V-freq, and Model Name.
• All Reset:Setto“Yes”torevertallsettingstothefactorydefault
status.
VX238
Splendid
Color
Image
Input Select
System Setup
VGA
HDMI1
HDMI2
Move Menu Exit
VX238
Splendid
Color
Image
Input Select
System Setup
Language
Information
Splendid Demo Mode OFF
50
OFF
English
1/2
Volume
ECO Mode
OSD Setup
Move Menu Exit