Asus VY229Q Series - Installation Procedure

1-4
Chapter 1: Product Introduction
Installaion
1. Turn off your computer and unplug your computer's power cord.
2. ConnectthesignalcabletotheHDMI(optional)and/orDP(optional)
inputsocketofthemonitor,andtheHDMI(optional)and/orDP
(optional)outputsocketofthegraphicscardonthecomputer.Then
tighten the thumbscrews on the signal cable connector.
3. Insert the monitor power cable into the power port at the back of the
monitor.
4. Plug the power cords of your computer and your monitor into a
nearby electrical outlet.
A
B
HDMI
or
AC IN
DP