Asus VY229Q Series - Physical Adjustments and Mounting; Detaching Stand for VESA Mount

2-1
ASUS LCD Monitor VY229Q Series
2.1 Detaching the arm/stand (for VESA wall
mount)
ThedetachablestandofthismonitorisspeciallydesignedforVESAwall
mount.
To detach the arm/stand
1. Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
2. Useyourngerstoloosenthescrewlocatedatthebottomofthe
base,andremovethebasefromthestand.Andthenremovethehinge
coverfrommonitorbodybyusingyourngers.
3. Use a screwdriver to remove the two screw on the arm,and then
detach the arm/stand from the monitor.
• Werecommendthatyoucoverthetablesurfacewithsoftclothtoprevent
damage to the monitor.
• Hold the stand of the monitor while removing the screws.
1
4
3
2
• TheVESAwallmountkit(100x100mm)ispurchasedseparately.
• UseonlytheULListedWallMountBracketwithminimumweight/load12 kg
(Screwsize:M4x10mm).