Asus VY229Q Series - Image Adjustments

3-6
Chapter 3: General Instruction
4. Image
YoucanadjusttheimageSharpness,TraceFree,AspectControl,
ASCR,MotionSync,andAdaptive-Sync,fromthismainfunction.
VY229Q
1920 x 1080 75 Hz
Splendid
Standard Mode
Signal
HDMI
Btightness
65
Splendid
EyeCare
Image
Signal
Back/Exit Enter
Color
Aspect Control
Sharpness
Adaptive-Sync
ASCR
Motion Sync
Trace Free
60
50
• Sharpness:Adjuststhepicturesharpness.Theadjustingrangeisfrom
0to100.
• Trace Free: Speeds up the response time by Over Drive technology. The
adjustingrangeisfromlower0tofaster100.
• Aspect Control:Adjuststheaspectratioto“Full”, “1:1 Ratio”.
• ASCR: Select ON or OFF to enable or disable dynamic contrast ratio
function.
• Motion Sync: Check to decrease motion blur and minimize ghosting part
whenon-screenobjectsarefastmoving.Whenthisfunctionisturnedon,
the screen may flash slightly and the brightness will decrease.
• Adaptive-Sync:ItcanallowaAdaptive-Syncsupportedgraphicssource
to dynamically adjust display refresh rate based on typical content frame
rates for power efficient, virtually stutter free and low-latency display
update.
• 1:1 Ratio is only available when input source is in 1:1 Ratio format。
• Phaseadjuststhephaseofthepixelclocksignal.Withawrongphase
adjustment, the screen shows horizontal disturbances.
• MotionSynccanbeopenedonthepremisethatrefreshrateis75Hzand
Adaptive-Syncisoff.