1-4
Chapter 1: Product Introduction
1.5 Monitor Introduction
1.5.1 Using the Control Buttons
Use the control buttons on the bottom of the monitor to adjust the image
settings. Press key 1-6 to activate the key list page.
Menu
Blue Light Filter
Brightness
QuickFit
Signal
Exit
21
3
4 5 6 7
1 2
3
4
5 6
1. Menu Button:
• Enter the OSD menu.
• Press the button for more than five seconds to activate the key
lock function. To unlock, press the button again for more than
five seconds.
2. Shortcut Key1:
• This is a Shortcut key. The default setting is Blue Light Filter
with 0.
To Next Page
Loading...
