2-1ASUS LCD Monitor VY279HGE Series
2.1 Assembling the monitor arm/base
To assemble the monitor base:
1. Have the front of the monitor face down on a table.
2. Place the arm hinge of the stand assembly onto its compartment on the rear
of the monitor.
3. Attach the base into the arm, making sure the tab on the arm fits into the groove
on the base.
4. Fix the base to the arm by fastening the bundled screw.
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
Base screw size: M6 x 12 mm.
Hinge screw size: M4 x 10 mm.
To Next Page
Loading...
