Do you have a question about the Asus WL-520GC and is the answer not in the manual?
Bandwidth | 2.4 GHz |
---|---|
Dimensions (WxDxH) | 164 x 116.5 x 31 mm |
Power requirements | +9V; 1A |
USB ports quantity | No |
Filtering description | URL |
Maximum data transfer rate | 0.125 Gbit/s |
Compatible operating systems | Windows 2000/XP/Vista |
Full duplex | Yes |
VPN support | IPSec, PPTP, L2TP |
Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11i, IEEE 802.1x, IEEE 802.3, IEEE 802.3u |
Supported network protocols | DHCP, DNS Proxy, NTP, DDNS, Virtual DMZ, WDS, IPv4 |
Channels quantity | 13 channels |
Ethernet LAN (RJ-45) ports | 4 |
Security algorithms | WPA, WPA-PSK, WPA2 |
Authentication method | 802.1x RADIUS, MAC |
LED indicators | AIR, WAN, LAN |
Storage temperature (T-T) | -30 - 50 °C |
Operating temperature (T-T) | 0 - 40 °C |
Storage relative humidity (H-H) | 20 - 90 % |
Operating relative humidity (H-H) | 50 - 90 % |
Weight | 262 g |
---|
Illustrates the physical connections for modem and router setup.
Explains the meaning of various LED indicators on the router.
Provides instructions for mounting the router on a wall.
Details how to establish a network connection using an Ethernet cable.
Outlines requirements and default settings for wireless setup.
Explains how to configure IP addresses for client devices.
Guides users through the initial web-based configuration of the router.
Provides a streamlined process for initial router configuration.
Describes different router modes like Home Gateway, Router, and Access Point.
Explains how to configure WEP, WPA, and WPA2 security settings.
Details how to set up printer sharing via the router's USB port.
Instructions for installing the ASUS wireless router utility software.
Guides users through the EZSetup wizard for easy configuration.
Steps to resolve issues when the router cannot be accessed via a web browser.
Solutions for problems related to establishing a wireless connection.
Steps to diagnose and fix internet connectivity issues.
Steps to configure the device using Windows Vista's WCN-Net process.