Asus WS C246M PRO - 3.4.5 ACPI Settings; 3.4.6 APM Configuration

ASUS WS C246M PRO
3-15
Chapter 3
3.4.5 ACPI Settings
3.4.6 APM Configuration
Enable ACPI Auto Configuration [Disabled]
ThisitemallowsyoutoenableordisableBIOSACPIAutoConguration.
Congurationoptions:[Disabled][Enabled]
The following items appears only when you set Enable ACPI Auto Configuration to
[Disabled].
Enable Hibernation [Enabled]
This item allows you to enable or disable the system’s ability to Hibernate (OS/S4
Sleep State).
Congurationoptions:[Disabled][Enabled]
This option may not be effective with some operating systems.
ACPI Sleep State [S3 (Suspend to RAM)]
This item allows you to select the highest ACPI sleep state the system will enter when
the SUSPEND button is pressed.
Congurationoptions:[SuspendDisabled][S3(SuspendtoRAM)]
Lock Legacy Resources [Disabled]
ThisitemallowsyoutoenableordisableLockofLegacyResources.
Congurationoptions:[Disabled][Enabled]
ErP [Disabled]
Allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP
requirement.Whensetto[Enabled], all other PME options will be switched off.
Congurationoptions:[Disabled][Enable(S4+S5)][Enable(s5)]