Fast. Easy. Setup!
XG-C100C V3 Quick Start Guide
1
2
3
Hardware
Installation
Driver
Installation
Wired
Connection
Insert the XG-C100C network
card into the PCI-E network slot,
ensuring that it is completely
seated on the slot.
Turn o your computer, unplug the
power cord, and open the system
cover.
Turn on your computer. Download
the driver from:
https://asus.me/XG-C100C
Follow the onscreen instruction to
nish the driver installation.
Connect devices to the RJ-45 port
on XG-C100C using Cat5e, Cat6,
Cat6a or higher network cables.
Speed LED
Link / ACT LED
Speed LED (Left LED / Dual color)
10G Green
5G / 2.5G / 1G / 100 M Yellow
Link / ACT LED (Right LED / Single color)
10G / 5G / 2.5G / 1G / 100M Blinking Green (transferring/
receiving data)
No Trac Green
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two
conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including
interference that may cause undesired operation.
SD/MMC/MS
Smart Card
CF/MD
InstallShield Wizard
To Next Page
Need help?
General
