To Next PageTo Next Page
Need help?Do you have a question about the Asus ROG STRIX LC II ARGB Series and is the answer not in the manual?
General| Radiator Material | Aluminum |
|---|---|
| Tube Length | 380mm |
| Lighting | ARGB |
| Radiator Size | 240mm |
| Fan Size | 120mm |
| Fan Type | ARGB Fan |
| Fan Speed | 800 - 2500 RPM |
| Fan Airflow | 80.95 CFM |
| Fan Noise Level | 37.6 dB(A) |
| Compatibility | Intel LGA 1700, 1200, 115x, AMD AM5, AM4 |
The main liquid CPU cooler unit for the ROG Strix LC II ARGB Series.
Includes 12cm or 14cm ARGB fans for customizable lighting and airflow.
Bracket for mounting the cooler on Intel sockets.
Rear support plate for Intel CPU cooler installation.
Mounting bracket for AMD AM4 and AM5 CPU sockets.
Cable for connecting multiple ARGB fans or peripherals.
Cable for connecting multiple fans to a single header.
Cable for connecting the AIO pump to the motherboard or USB header.
Screws for mounting fans to the radiator or case.
Screws for mounting the radiator to the PC case.
Standoff screws for Intel LGA 115X and 1200 sockets.
Standoff screws for Intel LGA 1700 sockets.
Standoff screws for AMD sockets.
Plastic collars used during installation.
Caps for thumbscrews used in installation.
Attaching the rear support plate for Intel CPU cooler installation.
Securing standoff screws for Intel socket compatibility.
Mounting the AIO pump unit onto the Intel CPU socket.
Removing the Intel bracket to prepare for AMD installation.
Attaching the mounting bracket for AMD CPU sockets.
Installing plastic collars and standoff screws for AMD sockets.
Mounting the AIO pump unit onto the AMD CPU socket.
Attaching the radiator and fans to the PC case.
Connecting the fan cables to the motherboard and pump.
Connecting the ARGB cables for lighting effects.
Connecting the AIO pump to the motherboard and USB header.
