Asus Z10PE-D8 WS - EATX Power Connectors (24-Pin EATXPWR1; 8-Pin EATX12 V1;EATX12 V2; 6-Pin EATX12 V3)

ASUS Z10PE-D8 WS
2-41
12. EATX power connectors (24-pin EATXPWR1; 8-pin EATX12V1/EATX12V2;
6-pin EATX12V3)
TheseconnectorsareforanEATXpowersupplyplugs.Thepowersupplyplugsare
designedtottheseconnectorsinonlyoneorientation.Findtheproperorientationand
pushdownrmlyuntiltheconnectorscompletelyt.
• DONOTforgettoconnectthe24+8+8-pinpowerplugs;otherwise,thesystemwillnot
boot up.
• Werecommendthatyouconnectthe6-pinEATX12V3powercablewheninstalling
morethantwoGPUorvideographicscard.
• UseofaPSUwithahigherpoweroutputisrecommendedwhenconguringasystem
with more power-consuming devices. The system may become unstable or may not
bootupifthepowerisinadequate.
• ThismotherboardsupportsEATX2.0PSUorlaterversion.
• Ensurethatyourpowersupplyunit(PSU)canprovideatleasttheminimumpower
requiredbyyoursystem.