Asus Z87-PLUS - Creating a RAID Driver Disk in Windows; Installing the RAID Driver During Windows os Installation

5-8

Chapter 5
5.2.2 Creating a RAID driver disk in Windows
®
To create a RAID driver disk in Windows
®
:
1. Start Windows
®
.
 
3. Place the motherboard support DVD into the optical drive.
4. Go to the Intel AHCI/RAID Driver menu then click Intel AHCI/RAID Driver path to
open the RAID driver folder.
5. Select 32bit or 64bit folder 


5.2.3 Installing the RAID driver during Windows
®
OS
installation
To install the RAID driver for Windows
®
7:
1. During the OS installation, click Load Driver to allow you to select the installation
media containing the RAID driver.
 
the optical drive, and then click Browse.
3. Click the name of the device you’ve inserted, go to Drivers > RAID, and then select
the RAID driver for the corresponding OS version. Click OK.
4. Follow the succeeding screen instructions to complete the installation.


To set up a Windows
®
UEFI operating system under RAID mode, ensure to load the UEFI
driver for your optical drive.