Asus Z97-Deluxe/USB 3.1 - APM Configuration

3-44
Chapter 3: BIOS setup
Chapter 3
ASM1061 Storage Controller (SATA6G_E12) [Enabled]
This item allows you to enable or disable the ASM1061 storage controller.
Conguration options: [Disabled] [Enabled]
The following items appear only when you set the ASM1061 Storage Controller to
[Enabled].
Hot-plug [Enabled]
This item allows you to enable or disable the Hot Plug support for SATA6G_E12.
Conguration options: [Disabled] [Enabled]
ASPM Support [Enabled]
This item allows you to enable or disable the ASPM controller to save energy when
using the ASM1060 Storage Controller for SATA6G_E12.
Conguration options: [Disabled] [Enabled]
Intel LAN Controller (LAN1-LAN2) [Enabled]
This item allows you to enable or disable the Intel LAN1/2 controllers.
Conguration options: [Disabled] [Enabled]
The following item appears only when you set the Intel LAN Controller to [Enabled].
Intel PXE OPROM (LAN1-LAN2) [Disabled]
This item allows you to enable or disable the PXE OptionRom of the Intel
®
LAN
controller.
Conguration options: [Enabled] [Disabled]
3.6.8 APM Configuration
ErP Ready [Disabled]
This item allows you to switch off some power at S4+S5 or S5 to get the system ready for
ErP requirement. When set to [Enabled], all other PME options are switched off.
Conguration options: [Disabled] [Enabled (S4+S5] [Enabled (S5)]