Do you have a question about the Asus Z97-PRO GAMER and is the answer not in the manual?
Chipset | Intel Z97 |
---|---|
CPU Socket | LGA 1150 |
Memory Slots | 4 x DIMM |
Max Memory | 32GB |
Memory Type | DDR3 |
Form Factor | ATX |
Audio | Realtek ALC1150 8-Channel High Definition Audio CODEC |
Networking | Intel I218V, 1 x Gigabit LAN Controller(s) |
RAID Support | RAID 0, 1, 5, 10 |
Memory Standard | DDR3 3200(O.C.)/3000(O.C.)/2800(O.C.)/2666(O.C.)/2400(O.C.)/2133(O.C.)/1866/1600/1333 MHz |
Expansion Slots | 2 x PCIe 3.0/2.0 x16 (x16 or dual x8); 2 x PCIe 2.0 x1 |
Storage Interfaces | 6 x SATA 6Gb/s |
USB Ports | 6 x USB 3.0, 8 x USB 2.0 |
Multi-GPU Support | AMD Quad-GPU CrossFireX Technology |
Precautions for preventing electrical shock hazards during system operation and handling.
Guidelines for safe installation and handling of the motherboard and components.
Important precautions before installing motherboard components or changing settings.
Details on the LGA1150 socket and supported Intel processors for the motherboard.
Step-by-step instructions for safely installing the CPU into the LGA1150 socket.
Procedure for installing the CPU heatsink and fan assembly, including thermal interface material application.
Overview of DDR3 DIMM sockets and compatibility guidelines for memory modules.
Recommendations for installing memory modules in the DIMM sockets for optimal performance.
Instructions on how to correctly install and remove memory modules (DIMMs) from the motherboard slots.
Guide to BIOS update utilities (EZ Update, EZ Flash 2, CrashFree BIOS 3, BIOS Updater) and procedures.
Instructions on entering and navigating the BIOS setup utility, including EZ and Advanced modes.
Configuration options for managing CPU and chassis fan speeds and profiles.
Settings for configuring overclocking-related items, including CPU and DRAM frequencies and voltages.
BIOS settings related to CPU features, power management, and core configurations.
Options for configuring system boot behavior, including boot order and fast boot settings.