24
Notebook PC E-Manual
USB 3.2 Gen 2 Type-C®/DisplayPort (on selected models)/
Power (DC) input combo port
The USB 3.2 (Universal Serial Bus 3.2) Gen 2 Type-C® port
provides a transfer rate of up to 10 Gbit/s and is backward
compatible to USB 2.0. Use a USB Type-C® adapter to connect
your Notebook PC to an external display. Insert the bundled
power adapter into this port to charge the battery pack and
supply power to your Notebook PC.
NOTE: Transfer rate of this port may vary per model.
WARNING! The adapter may become warm to hot while in use.
Do not cover the adapter and keep it away from your body while
it is connected to a power source.
IMPORTANT! It may take longer to fully charge your Notebook
PC through a low-voltage power source. Use only the bundled
power adapter to charge the battery pack and supply power to
your Notebook PC.
To Next Page
Loading...
Need help?
General