Need help?Do you have a question about the ASUSTOR AS6302T and is the answer not in the manual?
General| L3 cache | 2 MB |
|---|---|
| Stepping | B1 |
| Tjunction | 105 °C |
| Processor code | SR2Z8 |
| Processor cores | 2 |
| Processor model | J3355 |
| System bus rate | 5 GT/s |
| Processor family | Intel® Celeron® |
| Processor socket | BGA 1296 |
| Processor codename | Apollo Lake |
| Processor frequency | 2 GHz |
| Processor cache type | Smart Cache |
| Processor lithography | 14 nm |
| Processor manufacturer | Intel |
| Processor package size | 24 x 31 mm |
| CPU configuration (max) | 1 |
| Conflict-Free processor | Yes |
| PCI Express slots version | 2.0 |
| Processor boost frequency | The turbo boost is an automatic, managed accelleration of the processor when one of the cores is overloaded. |
| Processor operating modes | 64-bit |
| ECC supported by processor | No |
| PCI Express configurations | 1x2+2x1, 4x1 |
| Thermal Design Power (TDP) | 10 W |
| On-board graphics card model | Intel® HD Graphics 500 |
| Configurable TDP-down frequency | 2.5 GHz |
| Maximum internal memory supported by processor | 8 GB |
| On-board graphics card base frequency | 250 MHz |
| On-board graphics card burst frequency | 700 MHz |
| Number of displays supported (on-board graphics) | 3 |
| Memory slots | 2 x SO-DIMM |
| Internal memory | 2 GB |
| Internal memory type | DDR3L |
| Wi-Fi | - |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Supported network protocols | CIFS / SMB, SMB 2.0 / 3.0, AFP, NFS, FTP (Unicode Supported), TFTP, WebDAV, Rsync, SSH, SFTP, iSCSI/IP-SAN, HTTP, HTTPS, Proxy, SNMP, Syslog |
| Ethernet LAN data rate supported (max) | 10000 Mbit/s |
| RAID levels | 0, 1, JBOD |
| Storage drive size | 2.5/3.5 \ |
| Storage drive capacity | 10000 GB |
| Supported file systems | FAT32, HFS+, NTFS, ext3, ext4 |
| Storage drive interface | Serial ATA II, Serial ATA III |
| Supported storage drive types | HDD & SSD |
| Total installed storage capacity | 0 TB |
| Maximum supported storage capacity | 20 TB |
| Number of storage drives installed | 0 |
| AC input voltage | 100-240 V |
| Power consumption (sleep) | 0.34 W |
| Power consumption (typical) | 13.8 W |
| Power supply unit (PSU) capacity | 65 W |
| Certification | FCC, CE, VCCI, BSMI, C-TICK |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Cooling type | Active |
| Fan diameter | 70 mm |
| Product color | Black |
| Number of fans | 1 fan(s) |
| Operating system version | 2.7 |
| Operating system installed | ADM |
| Mac operating systems supported | Mac OS X 10.6 Snow Leopard |
| Server operating systems supported | Windows Server 2003, Windows Server 2008, Windows Server 2012 |
| Type | NAS |
| Device class | Home & Home Office |
| Backup features | Cloud |
| Number of users | 4096 user(s) |
| Browser supported | Internet Explore 11 Onwards, FireFox, Chrome, Safari, Microsoft Edge |
| Security algorithms | 256-bit AES |
| Number of execution units | 12 |
| Maximum number of PCI Express lanes | 6 |
| Memory types supported by processor | DDR3L, LPDDR3-SDRAM, LPDDR4-SDRAM |
| Memory channels supported by processor | Dual |
| Intel Identity Protection Technology version | 1.00 |
| Intel Small Business Advantage (SBA) version | 0.00 |
| Processor ARK ID | 95597 |
Weight and Dimensions| Depth | 230 mm |
|---|---|
| Width | 108 mm |
| Height | 163.5 mm |
| Weight | 2000 g |
Lists necessary tools for installing hard drives into the NAS.
Step-by-step guide for physically installing hard disk drives into the NAS bays.
Steps to connect the NAS to power and network, and how to turn it on.
Detailed instructions and precautions for upgrading the NAS's internal memory modules.
Guide on how to insert new memory modules into the NAS slots correctly.
To Next Page
