Operating Manual
GmbH
- 4 - Stand: 03.02.2020
Guarantee
The manufacturer assumes neither liability nor guarantee if:
» the instructions contained in the transport, installation and operating manual are not observed,
» the machine, including additional fixtures, is operated improperly and is not properly maintained and
repaired,
» any technical or functional modifications have been made that are not authorized by the manufacturer.
Intended Use
The Saphir 550 / 560 is an electronically controlled grinding and polishing machine that is designed exclusively to
execute grinding and polishing work of embedded or non-embedded samples automatically or manually.
This applies as well for all options available for the machine.
If the Saphir 550 / 560 is not used for the purpose listed here then no safe operation of the machine can be ensured.
This applies as improper use.
The owner/operator of the machine, not the manufacturer, is liable for all personal injuries and property damage that
occur from improper use!
The grinding and polishing machine is configured for:
mechanical preparation of many metallic and non-metallic materials.
use of all ATM grinding and polishing cloths / papers and foils up to ∅ 300 mm.
ATM GmbH makes no warranty of success if other media are used.
Intended use also includes the reading of this operating manual, as well as compliance with all instructions contained
therein – particularly the safety instructions.
To Next Page