Atag HG6471MBA - Operation; Ignition and Adjustment

EN 3
OPERATION
Description
Ignition and adjustment
1. zone indication
2. 0 position
3. High setting
4. Low setting
Each burner is fully adjustable between high and low settings.
• Press the control knob and turn it anticlockwise. The burner will ignite.
• Keep the control knob fully depressed for at least 3 seconds
between high and low settings. The thermocouple safety pilot has
been activated.
2
3
4
1
1. standard burner
2. rapid burner
3. simmer burner
4. pan support
5. glass top or stainless steel
drip tray
6. control knob
6 1
5
3
2
4
1