Ignition and adjustment
The burner is fully adjustable between high and low settings.
1. Press the control knob and turn it anticlockwise. The burner will ignite.
2. Keep the control knob fully depressed for at least 3 seconds between high and low settings.
The thermocouple safety pilot has been activated.
3. If desired, turn the wok selector ring to the roasting setting (5). The inner ring (wok setting) will
switch off and the outer ring (roasting setting) will switch on.
4. The wok burner will switch automatically to the wok setting if the control knob of the wok burner
is set to 0.
NOTE!
It is possible to switch between wok setting and roasting setting and back during cooking.
If the control knob is in the off setting (0-setting) the selector ring cannot be changed to the
roasting setting. Always turn this knob back completely to 0.
11
Operation
To Next Page
Loading...
