accordance with current installation regulations. Particular attention
shall be given to the relevant requirements regarding ventilation.
• We recommend that the gas hob be connected by means of a
fixed pipe. Connection using a specially designed safety hose is
also permitted.
• The pipe behind the oven must be made entirely out of metal.
• A safety hose may not be bent and must not come into contact
with moving parts of kitchen units.
• The gas supply valve must always be placed in an easily
accessible position.
Service
• Faulty parts may only be replaced by original parts.
The manufacturer can only guarantee that original parts meet
safety requirements.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
17
Installation
To Next Page
Loading...
