66 | P a g e
Pump LED’s
Description of WILO Para 15/7-60/IPWM1 pump operational LED’s.
LED is green, pump in normal function, PWM between 5% and 85%.
The green LED is flashing, pump in standby mode, PWM between 93% and 100%.
LED is Green/Red flashing, warning pump has a failure. If not solved, then it will start flashing RED.
LED is Red, pump has a failure.
Red LED is flashing, pump sensing a problem such as low water pressure, an overload of the
motor/impeller blocked or poor system flow.
To Next Page
Loading...
Need help?
General
