Atag OX9011T User Manual

GB 20
maintenance
cleaning
Use the enamelled baking tray as a drip-tray when grilling.
cleaning after use
For cleaning the inside and outside of the oven, we advise
the use of a mild detergent (washing-up liquid) and a moist
ATAG Shine double-sided microfibre cloth.
Dry off with paper towel or a dry cloth.
Never use aggressive cleaning agents as these can damage
the enamel or cause scratches.
stubborn stains
Stubborn stains can best be removed using an ATAG Shine
scratch-free scouring pad and ATAG Shine
Cleaning spray for oven, grill and extractor hood.
Use a glass scrapper to remove caked dirt from the oven.
The glass panel inside the oven can be removed by following
the instructions described below:
1 open the oven door completely.
2 flip the hinge hooks "A" outwards (see fig. E).
3 shut the oven door slowly until it reaches hooks "A",
making sure these are locked into slots "B" of the oven
door, as shown in fig F.
4 using both hands, remove the panel (fig. G).
5 Using both hands, push the oven door lightly inwards, to
enable the door hinges "C" to come away from the slots
"D" (see fig. H) and pull the door towards you until it is
released from the oven.
After cleaning it, reposition it correctly following the above
steps in the reverse order and flipping hooks "A" inwards
before you shut the oven door (fig. I).
AEP_082368400_OX9011T 01-12-2005 14:48 Pagina GB 20

Atag OX9011T Specifications

General

Adjustable thermostat	Yes
Oven type	Electric
Oven thermostat range	50 - 270 °C
Total oven(s) interior capacity	70 L
Control type	Rotary
Product color	Silver
Timer type	Digital
Power consumption (typical)	2950 W

Weight and Dimensions

Depth	480 mm
Width	895 mm
Height	546 mm