CAUTION! If children have
access to the appliance, it is
advised to deactivate AirDry as
opening the door may pose a
danger.
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press .
• The indicators , , and
are off.
• The indicator still flashes.
• The display shows the current
setting.
– = AirDry is deactivated.
–
= AirDry is activated.
2. Press to change the setting.
3. Press on/off to confirm the setting.
OPTIONS
Desired options must be
activated every time before you
start a programme.
It is not possible to activate or
deactivate options while a
programme is running.
Not all options are compatible
with each other. If you select
non compatible options, the
appliance automatically
deactivates one or more of
them. Only the indicators of the
still active options are on.
Extra Dry
Activate this option when you want to
boost the drying performance. With use of
this option, the duration of some
programmes, water consumption and the
last rinse temperature can be affected.
The Extra Dry option is a permanent
option for all programmes other than Eco
50° and need not to be selected at every
cycle.
Every time Eco 50° is activated, Extra Dry
option is off and needs to be chosen
manually. In other programmes, the
setting of Extra Dry is permanent and it is
automatically used in next cycles. This
configuration can be changed at any time.
Activating Extra Dry option deactivates
Time Saver.
How to activate Extra Dry
Press . The related indicator comes on.
If the option is not applicable to the
programme, the related indicator does not
appear or it flashes quickly for a few
seconds and then goes off.
The display shows the updated
programme duration.
Time Saver
The Time Saver allows to reduce the
duration of a selected programme by
approximately 50%.
The washing results are the same as with
the normal programme duration. The
drying results can decrease.
This option increases the pressure and
the temperature of the water. The washing
and the drying phases are shorter.
By default, Time Saver is off, but it is
possible to activate it manually. This
option cannot be combined with Extra Dry.
How to activate Time Saver
Press , the related indicator comes on.
If the option is not applicable to the
programme, the related indicator does not
come on or it flashes quickly for a few
seconds and then goes off.
The display shows the updated
programme duration.
11
To Next Page
Loading...
Need help?
General
