EN 22
Fixing the squaring brackets
• Screw the brackets 7.3 to the hood canopy using the screws 12b
provided, without tightening completely.
• Using the screws 12c provided, fasten the other part of the
brackets 7.3 either to the side walls of the unit or to the lower part
of the cooker top.
• Tighten the screws 12c and 12b completely.
Fixing the Motor Unit
• Installation of the motor unit (1) at the front or rear must be decided
according to the position of the kitchen unit, making sure that the
plug is properly positioned.
INSTALLATION
12b
7.3
12b
7.3
12c
To Next Page
Loading...
