AT&T 1070 Quick Reference Guide

7
Indicator lights & tones
Continued from previous page
7
Alert tones
Confirmation tone Programming command completed successfully.
One double-beep
every 3
0 seconds
The hold reminder feature is on and there is a
line on hold.
A triple-beep During volume adjustment, the volume level has
reached the maximum or minimum.
NEW CALL
On when there are unreviewed calls.
Flashes when there are new voice mail
messages. The screen displays COVM, with 1, 2,
3, and/or 4 under COVM, depending on which
lines have messages waiting.
Flashes when there are new system extension
messages. The screen will display DTAD: XX/YY
(with XX greater than zero).
INTERCOM
On when the telephone is on an intercom call
or a paged call.
On when the system is busy and the intercom is
unavailable.
Flashes when an incoming intercom call.
HEADSET
On when the headset is in use.
Flashes when there is an auto-redial call with
the headset.
MUTE
On when the microphone is muted.
SPEAKER
On when the speakerphone is in use.
Flashes when there is an auto-redial call on the
speakerphone.
•
•
•
•
•
•
•
•
•
•
•
http://www.ochimp.com/
http://www.ochimp.com/

AT&T 1070 Specifications

General

Lines Supported	1
Speakerphone	Yes
Caller ID	Yes
Display	LCD
Intercom	Yes
Handset Locator	No
Call Waiting	Yes
Volume Control	Yes
Redial	Yes
Power Source	AC Adapter
Type	Corded