AT&T 146 - FCC Regulations; Radio Frequency Interference (Part 15); Telephone Network Connection (Part 68)

If, for any reason, you need to know the pinouts for the modular jacks on the PagePac 6 or PagePac 6
Port Saver, pinout information is given below.
PagePac 6 PAGE Jack
Pin* Cord Lead† Function
Connect to Paging Port
1
Not Used
Not Used
Not Used
3
4
5
6
2
Black
Access Control (C) Dry Contact Closure (C)
Red Ring Ring
Green
Tip Tip
Yellow
Access Control (C1) Dry Contact Closure (C1)
Not Used
Not Used
Not Used
*Pins numbered from left to right, as seen when looking into jack.
†When using a standard modular cord.
Note:
A telephone system paging port dry contact closure is required to connect pins 2 and 5 of
the PAGE jack together to access paging.
PagePac 6 Port Saver C.O. LINE and PHONES Jacks
Pin*
Cord Lead†
Function
Connect to Line Jack
1
2
3
4
5
6
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
Red
Ring
Ring
Green
Tip
Tip
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
*Pins numered from left to right, as seen when looking into jack.
†When using a standard modular cord.
17