INTRODUCTION TO THE
AT&T PagePac® 6 VOICE PAGING SYSTEM
AT&T PagePac 6 is a compact, powerful, voice-paging system that integrates single-zone pag-
ing capability into your telephone system. PagPac 6 can be used with most AT&T telephone
systems, from single-line residential systems to modern electronic key and PBX systems.
Front
Rear
PagePac® 6 Voice Paging System
FEATURES
●
●
●
●
●
●
●
●
Connects to your telephone system through standard modular telephone cords.
Uses standard touch-tone or rotary telephones to page.
Provides a 6-watt, voice-coil output.
Supports a wide range of indoor and horn speakers.
Controls background music provided from a separate source, such as the PagePac Music-
Mate™, an FM tuner, a tape deck, or leased source, etc.
NOTE: Those who use paging systems to rebroadcast copyrighted music are required to obtain
licenses from and pay fees to copyright owners. This usually involves obtaining licenses and
paying fees to either ASCAP and/or BMI (American Society of Composers, Artists and
Producers, Broadcast Music Inc.). It is the user’s obligation to obtain any license required
and pay any fees.
Comes with its own 12-VAC power supply that plugs into any standard 120-VAC, 60 Hz outlet.
Connects directly to your telephone system page port.*
Offers separately purchased adapters for telephone systems without page port connections.
*Page port must provide a dry contact closure.
1
To Next Page
Loading...
Need help?
General
