AT&T 1855 - Telephone Installation

5
Getting Started
Telephone installation
Install the telephone as shown below. Choose a location where the phone is not
exposed to excessive heat, cold, dust or moisture.
TEL LINE POWER
AC 6V
Plug power cord
transformer into
electrical outlet.
Plug line cord into
telephone jack.
NOTE: Use only the power cord supplied with this product. If you need a replacement, call 1 800 222–3111.
Be sure to use an electrical outlet not controlled by a wall switch.
Route cord through slot.
Plug coiled handset
cord into jack on left
side of telephone.
ATT-1855CIB-d05.qxp 4/8/2005 5:36 PM Page 5