AT&T 250 - Removing Call Records; Setting Screen Display Options

17
Removing Call Records from History
Removing a Specific Call Record
1 Press + or - to display the call record you want to remove.
2 Press and release r to remove the displayed number from
Call History. The screen displays:
3 Press r again.
Removing All Calls
1 Press + or - to enter Call History.
2 Press and hold r for about two seconds. The screen displays:
3 Press and hold r again to remove all calls. The screen
displays:
NOTE: Once a call is removed from Call History, it cannot be retrieved.
Setting Screen Display Options
You can customize how the Caller ID features of this product work.
1 Lift the handset (the phone will be “off the hook”while you set
options).
2 Press and release N until the screen displays the option you
want to set.
3 Press + or - until the screen displays your selection.
4 Press N.
This saves your selection and automatically moves you to the next option.
The unit returns to standby unless you make a selection within 30 seconds.
When you have finished setting options,wait 30 seconds for the unit to
return to standby. (See FEATURE SETUP for a list of display options.)
END OF LIST
REMOVE ALL?
CALL REMOVE?
CALLER ID OPERATION