10
Removing All Calls from Call History
1 Press C to enter the call history.
2 Press and release r for 1.5 seconds when no call is displayed.
The screen displays REMOVE ALL CALLS?.
3 Press and release r for 1.5 seconds again to remove all calls.
The screen displays END OF LIST.
Display Dial
As you review the call history,you can dial a displayed phone number.
If the call information came from your home area code (the one you
programmed at installation),the screen displays only the seven-digit
number you are calling (without an area code). If you receive a call
from an area code not programmed into the telephone,the screen will
display the ten digits of the phone number,and will automatically dial
the “1”before the area code.
1 Press C, then use + or - to locate the number you want
to call.
2 Lift the handset,then press and release D to call the number
on the screen. You cannot dial PRIVATE or UNKNOWN calls.
CALLER ID OPERATION
To Next Page
Loading...
