7
Belt Clip
You can remove the belt clip from the handset.
Headset
You can use this telephone
hands-free when you install
any industry standard 2.5
mm headset (purchased
separately). For best results
use an AT&T 2.5 mm
headset.
Plug the headset into the
jack located on the left side
of the handset (under the
small rubber flap). Do not
force the connection, but
make sure the plug fits
securely.
INSTALLATION
INSTALLATION
b) Press tabs
on belt clip
into slots
on back of
handset to
reattach.
a) Slide
down
into
grooves.
c) To remove,
lift one
side
with your
thumbnail
and push
back.
To Next Page
Loading...
