Redial
The last number dialed at the handset or base (up to 24 digits) is stored in
redial memory until you dial another number.
1 Press P. Wait for the dial tone and
for the to appear.
2 Use the softkey to select REDIAL.
(REDIAL does not appear on the screen if
there is no number in redial memory.)
NOTE: MEM on the screen display refers to
telephone memory. For Telephone Memory
Features, see TELEPHONE MEMORY/DIRECTORY
starting on page 25.
Temporary Tone
If you have dial pulse (rotary) service,you can press * during a call to
switch to touch tone dialing.
1 Dial the call.
2 Press *. Buttons pressed after this send tone signals.
3 When you hang up or press ,the phone automatically
returns to dial pulse (rotary) dialing.
Mute
Mute allows you to hear your caller,but prevents the caller from hearing you.
1 Press > while on a call,until the screen
displays MUTE;select MUTE.
2 To return to your conversation,select
UNMUTE.
TELEPHONE OPERATION
AT THE HANDSET
20
MUTED
UNMUTE HOLD
MUTE HOLD
5550123
MEM REDIAL
To Next Page
Loading...
