22
ANSWERING SYSTEM OPERATION
AT TOUCH TONE PHONE
Remote Access Commands (continued)
Function: Command:
Record memo Press * 8; then mailbox number where
you want memo recorded; speak after
beep; press # 5 to exit.
End remote access call Press * 0.
Turn system off Press # 0; the system announces,
“Machine off.” Press # 0 again to turn
the system back on.
Turn system on When system is off, it answers after 10
rings and announces, “Please enter your
remote access code.” Press #, then enter
your remote access code.
NOTE: The remote access call will automatically end if 20 seconds
go by with no key being pressed (other than when recording or playing
messages or announcements).
To Next Page
Loading...
