5
INSTALLATION
Wall Installation
1 Connect the telephone line cord.
2 Connect the power cord.
CL flashes in the Message Window.
Use only the power cord supplied with this product. If you
need a replacement, call 1 800 222–3111.
3 Mount the base on the wall.
4 Follow Steps 3–5 in “Table/Desk Installation.”
a) Align holes
on base with
mounting
studs on wall
jack.
b) Place power
cord as shown.
c) Pull base
down on
mounting
studs until it
locks into
place.
To Next Page
Loading...
