Connect to the Internet
Turn on your Mobile Hotspot
Press and release the power button.
Tap the lock screen.
To navigate, tap the icons on the
home screen.
Note: The screen goes dark to save power.
Press and release the power button to wake
the screen.
On your laptop or other
wireless devices
Open your Wi-Fi network connection
manager.
Connect your device to the hotspot
with the Wi-Fi name and password.
Note: The home screen displays the hotspot’s
Wi-Fi network name and password. Your Wi-Fi
network name will be different than this example.
Unread
messages
Pending alert
Wi-Fi name
Wi-Fi name
Wi-Fi
password
Wi-Fi
password
Set Up Your Mobile Hotspot
Insert the battery.
Install the back cover.
Firmly close the battery cover and accessory ports to ensure the device is
water-resistant and dust proof.*
Note: The mobile hotspot comes
with a pre-installed SIM card.
For BatteryBoost
charging
For AC charging
Home Screen
Basic Connection and Device Options
Change Wi-Fi settings
• Enable Guest Wi-Fi
• Change Main and Guest Wi-Fi
names/passwords
• View connected devices
• Set maximum number of devices
Change basic device settings
• Adjust screen timeout.
• Adjust data connection settings
• Update software
• Find hotspot’s wireless number
• Set Wi-Fi range
• Hide Wi-Fi network name and password
.
Find More Information
On the Web
• Visit the interactive web tutorials available at att.com/devicehowto. Select
brand: AT&T; model: Unite Explore.
• Additional support is available online, including device applications,
troubleshooting and user forums at att.com/DeviceSupport.
On the phone
• Call AT&T Customer Care at 800.331.0500 for assistance with your AT&T
service. When prompted, enter the 10-digit wireless phone number
associated with your DataConnect service. The wireless phone number is
found on the mobile hotspot at Settings > About > Device Information.
Quick Start
Gold pins
Signal strength
Battery
Network indicator
Data Usage
Tap for more
LCD screen
External accessory
connector
microUSB charging
& BatteryBoost port
Power/Wake device
External accessory
connector
Additional options:
View messages and
change settings.
Change passwords, view
connected devices,
guest Wi-Fi options, and
more
AT&T Unite Explore
Internet
status LED
Wi-Fi details
*Meets US MIL-STD-810G for shock-resistance. Certified IP65 for protection against dust and
water jets. Device will not operate under water and should be dried as quickly as possible when
wet. Shock-resistant when dropped from ≤ 4 ft onto flat surface. Device may not perform as
shown in all extreme conditions.
Note: Check your Alerts and Messages for important service reminders.
Home
Back
© 2016 AT&T Intellectual Property. All rights reserved. AT&T, the AT&T logo and all of the AT&T
marks contained herein are trademarks of AT&T Intellectual Property and /or AT&T affiliated
companies. All other marks contained herein are the property of their respective owners.
To Next Page
Need help?
General
