AT&T BL102-2S - Initial Basic Settings; Date and Time; Smart Call Blocker Setup Via Voice Guide

12
8
X/DELETE Ì Press to delete the message currently playing.
Ì Press twice to delete all old messages when the
phone is not in use.
9
/PLAY/
STOP
Ì Press to play messages.
Ì Press to stop message playback.
10
VOL
Ì Press to adjust the volume during message
playback.
Ì While the telephone is not in use, press to adjust
the base ringer volume.
11
/SKIP Ì Press to skip to the next message.
Telephone base overview
Initial basic settings
Date and time
Note: Set the date/time before using the answering system.
Using a cordless handset:
1. MENU -> / -> Set date/time -> SELECT.
2. Enter the month (MM), day (DD) and year (YY) -> SELECT.
3. Enter the hour (HH) and minute (MM).
4. / -> AM or PM -> SELECT.
Aer you install your telephone or power returns following a power outage, the
handset will prompt you to set the date and time. To skip setting the date and time,
press OFF/CANCEL on the handset.
Smart call blocker setup via voice guide
Aer you install your telephone for the rst time, the telephone base will prompt if
you want to set Smart call blocker and answering system.
Follow the voice guide to set up. To skip or stop the setup, press DELETE on the
telephone base anytime.
Aer the Smart call blocker setting is done or skipped, the telephone base will then
prompt you to set up the answering system.