Smart call blocker
51
Call block settings
Save a caller ID log entry to allow list:
1. Search for the desired caller ID log entry (see Review the caller
ID log on page 32).
2. When the desired entry displays, press MENU/SELECT.
3. Press qCID or pDIR to scroll to To Allow list, then press
MENU/SELECT.
4. The handset displays Enter number. Use the dialing keys to edit
the number, when necessary.
f Press qCID or pDIR to move the cursor to the le or right.
f Press MUTE/DELETE on the handset to backspace and erase
a digit.
f Press and hold MUTE/DELETE to erase the entire entry.
f Press and hold REDIAL/PAUSE to insert a three-second dialing
pause (a P appears).
5. Press MENU/SELECT to move to the name. The screen displays
Enter name.
6. Use the dialing keys to add or edit the name.
f Press qCID or pDIR to move the cursor to the le or right.
f Press 0 to add a space.
f Press MUTE/DELETE to erase a character.
f Press and hold MUTE/DELETE to erase all characters.
f Press TONE to change the next letter to upper or lower
case.
7. Press MENU/SELECT when done and the screen shows Saved.
To Next Page
Loading...
Need help?
General
