Operational Instructions
Page 8
Pairing Your Bluetooth Device
Note: Please see page 13 of this manual for Bluetooth compatibility
information.
Step 1: On your Loudspeak’r:
- Make sure the speaker is powered off, and the master switch on
the rear is in the ON position.
- Press and hold the
button until the front LED indicator flashes
RED/BLUE.
- The speaker will say “Discovering”.
- Your speaker is now in pairing mode and is ready to connect to
your Bluetooth device.
Note: The speaker will stay in pairing mode for up to 3 minutes.
Step 2: On your compatible Bluetooth device:
- Navigate to the Bluetooth menu on your device.
- Turn on Bluetooth and begin searching for available devices to
pair.
- Select “LoudSpeak’r” from the list of results, and your device will
begin to pair.
- If your device asks for a pairing pass code, enter “0000”.
- Once paired, you will hear a voice prompt and the LED indicator on
the speaker will only flash blue.
- The LoudSpeak’r has a wireless range of approximately 30 feet,
and your media device will stay connected to the speaker within
that range.
Note: Many Bluetooth devices, including iPhone & iPad, will not
require you to enter a pairing pass code.
Operational Instructions
Page 9
Connecting to a Paired Bluetooth Device
- You will only need to pair your Bluetooth device with the speaker one
time.
- The next time your Bluetooth device and the speaker are in range
of each other, and the Bluetooth feature is turned on, they will
automatically connect.
- The speaker will only automatically connect to the last Bluetooth device
it was connected to.
- If your paired device does not automatically connect, navigate to the
Bluetooth menu on your device and select LoudSpeak’r from the list.
Note: Your LoudSpeak’r can pair with and remember multiple devices,
however it can only connect with one device at a time.
Music Playback Functions
- Once your media device is connected to the speaker, simply start
playing your music, movie or game. All the audio will automatically be
played through LoudSpeak’r.
- Press to Play/Pause the audio.
- Press
to skip to the next track.
- Press to skip to the previous track.
- Press + or - to adjust the volume level of the speaker.
- When maximum or minimum volume level is reached, you will hear an
alert tone.
- During an incoming call, the music will automatically pause playback and
you can answer/reject the call using the button controls.
Note: The volume controls on your media device work separately from
the volume controls on the LoudSpeak’r.
To Next Page
