AT&T Business in a Box - Step 4 Connect Router to Ethernet Devices

Step 3 - Connect the Add-on to the Base Unit (ATA Depicted)*
Connect the Add-on device to the Base Unit using the provided cable.
Instructions will be provided as to which Add-on device will connect to
which Ethernet port on the Base Unit Router.
8
© 2014 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
Interconnect
Included Orange cable to orange ports
* Note: The same
method will be utilized to
connect additional ATA’s
and/or the 8 or 24 Port
POE Add-on devices if
required.