Need help?Do you have a question about the AT&T DataRemote POTS in a BOX CDS9070 and is the answer not in the manual?
General| Device Type | Network Router |
|---|---|
| Model | CDS9070 |
| Compatibility | POTS (Plain Old Telephone Service) |
| Power Source | AC Adapter |
| Weight | 1.2 lbs |
| Connectivity Technology | Cellular |
| Ports | RJ-11 |
| Protocols | TCP/IP |
Explains the status and meaning of various LED indicators on the device's front panel.
Explains how to set up a password for the administrator user and adjust settings.
Details the process of accessing the management portal via the LAN port.
Explains how the system automatically obtains IP addresses via DHCP.
Defines PPPoE and its usage for DSL modem users.
Details the configuration steps for the LTE connection.
Guides on enabling wireless and setting up the SSID.
Explains how to set up wireless encryption using WPA/WPA2.
Describes how WAN Failover ensures internet connectivity by switching between WAN, LTE, and Wi-Fi.
Explains how to configure WAN failover based on ping results.
Instructions on obtaining SIP accounts from the administrator or provider.
Guides on connecting the CDS9070 to the internet properly for SIP.
How to check the FXS Account registration status for making calls.
Explains the prerequisites and process for making calls via ATA or direct IP.
Details call hold, transfers, and conference capabilities.
Steps to connect to the PC and log into the management portal.
Explains WAN configuration options like Static IP, DHCP, PPPoE, and Bridge modes.
Explains LAN port function, NAT, and local IP address settings.
Covers VPN client, L2TP server, and IPsec connection configurations.
Guides on configuring DMZ host and port forwarding rules.
Configuration for Dynamic DNS service.
Settings for Quality of Service to prioritize network traffic.
How to clone the router's MAC address for ISP registration.
Configuration of static routing rules.
Basic wireless settings for enabling and configuring the network.
Configuration of wireless security settings, including encryption methods.
Explains Wi-Fi Protected Setup (WPS) for easy connection.
Allows monitoring of wireless stations associated with the AP.
Option to enable Wi-Fi Client for WAN Failover.
Settings to improve voice quality by configuring VoIP QoS parameters.
Configuration of dial plan rules for managing outgoing calls.
Configuration settings for FXS ports to register SIP accounts.
Settings for configuring audio codecs and fax for FXS ports.
Subscription options for supplementary services like Call Waiting, MWI, and Speed Dial.
Configuration of IP/Port filtering rules to control network traffic.
Settings for filtering web content by URL or keywords.
Enables or disables network services like FTP, SIP, PPTP, L2TP, and IPsec.
Options for managing configuration files, user settings, and language.
NTP settings for synchronizing the router's clock.
Procedures for upgrading firmware and resetting to factory defaults.
Configuration for scheduling tasks like Wi-Fi on/off or reboots.
Settings for provisioning the router, often used in enterprise environments.
Configuration for the TR069 protocol for remote management.
How to log out from the management interface.
How to reboot the CDS9070 device.
Steps to configure a PC to automatically obtain an IP address.
Solutions for issues preventing connection to the management portal.
Solution for regaining access if the password is forgotten.
Compliance statement regarding FCC regulations for radiation exposure.
To Next Page
