115
6 Troubleshooting Guide
6.1 Setting up your PC to get an IP
automatically
Following are the process of setting your PC gets IP automatically
Step 1. Click the “begin”
Step 2. Select “control panel”, then double click “network connections” in the “control panel”
Step 3. Right clicks the “network connection” that your PC uses, select “attribute” and you can see the interface as picture
1:
Step 4. Select “Internet Protocol (TCP/IP)”, click “attribute” button, and you can see the interface as following Picture 2
and you should click the “Get IP address automatically”.
To Next Page
Loading...
