AT&T DataRemote POTS in a BOX CDS9070 - LAN Configuration

56
5.3.2 LAN
LAN Port:
The most generic function of router is NAT. NAT translates the packets from public IP addresses to local IP
addresses, forwarding the right packets to the right host.
Local IP
Address
Type in the local IP address for
connecting to a local private network
Local Subnet
Mask
Type in an address code that
determines the size of the network
Local DHCP
Server
Enable or Disable Local DHCP
server
DHCP Start
Address
Enter the Start Address for the
DHCP Server IP address pool
DHCP End
Address
Enter the End Address for the DHCP
Server IP address pool
DNS Mode
Choose “Auto” from the drop-down
list to automatically enter the DNS
Server addresses or choose