AT&T DataRemote POTS in a BOX CDS9070 - Setting up the Wireless Connection; Enable Wireless and Setting SSID

30
4.7 Setting up the Wireless Connection
To set up the wireless connection, please read the following steps.
4.7.1 Enable Wireless and Setting SSID
Open Wireless 2.4GHz or 5GHz / Basic webpage as shown below
Radio On/Off
Select to enable or disable wireless
Wireless
Connection
Mode
Select Access Point or Client
Network Mode
Choose a network mode from the drop-
down list
Multiple SSSD
Set and name multiple SSID’s