AT&T DataRemote POTS in a BOX CDS9070 - Page 31

31
Broadcast
(SSID)
Broadcast or hide the SSID
AP Isolation
Prevents a wireless client from
communicating with other wireless
clients.
MBSSID AP
Isolation
Other clients outside the Access Point
cannot access the clients under this
Access Point
BSSID
A group of wireless workstations and a
wireless local area network access point
form a basic service set (BSS), each
computer in the BSS must be
configured with the same BSSID
Frequency
Choose a channel frequency
HT Physical
Mode
The HT (High Throughput) Physical
mode settings allow for control of the
802.11n wireless environment.
Operating
Mode
Mixed Mode: In this mode, packets are
transmitted with a preamble compatible