AT&T CL82113 - Answer a PTT Call; Change One-to-One PTT to Intercom; Search the Directory

Multiple handset use
Push-to-talk (PTT)
Answer a PTT call
You can respond to a PTT call as described below.
When your handset receives a PTT call, it beeps and shows Press and
hold [PTT] to talk.
When the other party is speaking, your speakerphone light is on, and
your handset shows PTT From HS X To HS X (the first X represents the
initiating handset number, and the second X represents your handset
number; a maximum of four handset numbers appear).
When your speakerphone light is off (the screen shows Press and hold
[PTT] to talk), press and hold PUSH TO TAL� on your handset. You will
hear a chirp. Speak towards the handset.
While you are speaking, your handset shows PTT To Handset: X
(X represents the handset numbers of one or more destination handsets;
a maximum of four handset numbers appear).
Your voice is broadcast to all destination handsets.
After speaking, release PUSH TO TAL�. Your handset will beep. After the
beep, if your speakerphone light is off, you can press and hold PUSH TO
TAL� to continue speaking, or the destination handset can respond.
Change a one-to-one PTT call to an intercom call
You can convert a one-to-one PTT session to an intercom call.
When your handset shows Press and hold [PTT] to talk, press
MENU/SELECT. The screen shows Intercom.
Press MENU/SELECT. Your handset displays Calling other handset or
Calling HANDSET X. The destination handset briefly shows Push to talk
Ended and then Other handset is calling or HANDSET X is calling. The
destination handset rings.
Press PHONE/FLASH or any dialing keys (0-9,
#
or TONE ) on the
destination handset to answer the intercom call. Both handsets now show
Intercom.
To end the intercom call, press OFF/CANCEL on your handset or place
the handset in the telephone base or charger. Both screens show
Intercom ended.
1.
2.
3.
•
•
1.
2.
3.
4.
36